STC11F60XE series

Features:

• Enhanced 80C51 Central Processing Unit ,1T per machine cycle, faster 6~7 times than the rate of a standard 8051.
• Operating voltage range: 5.5V~4.1V/3.7V or 2.1V/2.4V~ 3.6V (STC11Lxx series)
• Operating frequency range: 0- 35MHz, is equivalent to standard 8051:0~420MHZ
• STC11F/Lxx series Flash program memory : 1/ 2/ 3/ 4/ 5/6 /8 /16 /20 /32 /40 /48 /52 /56 /62K
• On-chip 1280/512/256 byte RAM
• Be capable of addressing up to 64K byte of external RAM
• Dual Data Pointer (DPTR) to speed up data movement (except STC11F01 series)
• Code protection for flash memory access
• Two 16-bit timer/counter, as the same as Timer0/Timer1 of standard 8051.
• 6 vector-address, 2 level priority interrupt capability
• One enhanced UART with hardware address-recognition, frame-error detection function, and with self baud- rate generator.
• One 15 bits Watch-Dog-Timer with 8-bit pre-scaler (one-time-enabled)
• Simple internal RC oscillator and high-precision external crystal clock.
• Three power management modes: idle mode, slow down mode and power-down mode.
• Power down mode can be woken-up by INT0/P3.2 pin, INT1/P3.3 pin, T0/P3.4, T1/P3.5, RXD/P3.0 pin (or RXD/P1.6 pin).
• Maximum 40 programmable I/O ports are available
• Programable clock output Function. T0 output the clock on P3.4, T1 output the clock on P3.5,BRT output the clock on P1.0.
• Operating temperature: -40 ~ +85°C (industrial) / 0~75°C (commercial)
• Package type :LQFP-44,PDIP-40,PLCC-44,QFN-40,SOP20,DIP20, LSSOP20,DIP18,SOP16,DIP16,TSSOP14
• All products are baked 8 hours in high-temperature 175°C after be packaged ,Manufacture guarantee good quality.
• In Keil C development environment, select the Intel 8052 to compiling and only contain< reg51.h >